Tipps: Notes.ini - Parameter für die Fehlersuche

Einige Notes.ini Parameter für Admins und Entwickler, die ich auf einer Webseite gefunden habe und gern teilen möchte.

Allgemeine Debugparameter

Console_Log_Enabled=1
This is Domino’s dynamic debug outfile for trapping error messages to a log file (other than the LOG.NSF). The console logging can be switched on and off with the start consolelog and stop consolelog commands.

Console_Log_Max_kbytes=100000

This parameter sets a size limit to the CONSOLE.LOG file. Setting the Console_Log_Max_kbytes to 100000 results in the CONSOLE.LOG file being limited to 100 MB in size. On hitting that limit, it will wrap.

Debug_Threadid=1

Enabling this debug parameter provides more information about each entry posted to the Domino server console, including job number, process ID (PID), and thread number. This is extremely useful when combined with other utilities to determine the last activity by a thread prior to a crash, or what a particular thread was doing during a hang or slowdown situation.

Log_View_Events=1

This records to the console whenever views are rebuilt.
DEBUG PARAMETERS

Debug_Show_Timeout=1
This parameter, combined with the Debug_Capture_Timeout=10 parameter, allows for the population of a file called SEMDEBUG.TXT, which exists in the IBM_TECHNICAL_SUPPORT subdirectory, and is vital to determine the root cause for server slowdowns or hangs.

Debug_Capture_Timeout=10

This parameter, combined with the Debug_Show_Timeout=1 parameter, allows for the population of a file called SEMDEBUG.TXT, which exists in the IBM_TECHNICAL_SUPPORT subdirectory, and is vital to determine the root cause for server slowdowns or hangs.

 
SMTP DEBUG PARAMETERS

SMTPDebug=4
Enabling this debug parameter logs all the inbound SMTP protocol conversations to include commands and responses along with some of the text, but not the body of the messages.

SMTPDebugIO=3

This debug parameter is used to log all the data received by the SMTP listener task.
Attention: The debug parameters provided here must only be used if you are already familiar with them or if you have been advised to do so by Lotus Support. Also note that some additional levels of setting might be available for a given parameter.Chapter 8. Problem determination  351

SMTPClientDebug=1

This debug parameter is used to log all the outgoing SMTP protocol conversations for all the external messages transferred by the router task.

SMTPDebugControls=3

This assists in determining a variety of issues involving SMTP to include reverse DNS queries and blacklists.

SMTPDebugDNSBL=1

This assists in determining issues when utilizing the blacklists function.

SMTPSaveImportErrors=3

This provides the SMTP listener task to save all the inbound messages during import, and then delete all the messages that have successfully been received and written to mail.box. This leaves only the messages that fail to be imported in the mail.box. These messages are saved to a temp file for review.

MIME_Save_Convert_Failures=1

Enabling this setting results in the copying of messages that failed conversion, to a separate database called CFDB.NSF.

 
MAIL ROUTING DEBUG PARAMETERS

Log_MailRouting=40
This posts to the Domino console, all the transfer messages, message queues, and full document information involving mail.box.

DebugRouter=3

This debug parameter also increases the logging level for router activity.

Debug_TCP_Resolver=1

This debug parameter increases the logging of the TCP/IP name lookup function and assists in determining DNS issues.

Debug_Directory_Assistance=1

This provides for high-level logging of directory assistance activities.

Debug_NameLookup=1

This enhances the logging of the name lookup function.

DebugRouterLookUp=3

This displays how the router task resolves a name lookup.

 
AMGR DEBUG

Debug_AMGR=*
This increases all aspects of logging for the Agent Manager task.

Log_AgentManager=1

This specifies that the execution of partially and completely successful events are logged.

 
UPDATE DEBUG PARAMETERS

Log_Update=2
Setting this debug parameter posts to the Domino console when the Indexer starts and stops and when the Indexer updates the views and full text indexes for specific databases. It also records the names of the views being updated.352  Implementing IBM Lotus Domino 7 for i5/OS

Debug_NIF_Update=1

Enabling this debug parameter provides for a report when an the Update task is started and stopped. This report includes the database name, the view name, and the user name of the update. Most importantly, if an error is encountered it prints out the error message during the rebuild or creation of the view involved.

Debug_NIF=1

This parameter prints out information concerning the opening, closing, and updating of significant indexing events and must be used rarely because of the excessive output.

 
POP3 DEBUG PARAMETERS

POP3Debug=4
This serves the same purpose as the SMTPDebug parameter, except that it does so for the POP3 task.

POP3DebugIO=3

This serves the same purpose as the SMTPDebugIO parameter, except that it does so for the POP3 task.

POP3ClientDebug=1

This serves the same purpose as the SMTPClientDebug parameter, except that it logs the entire conversation for the POP3 task.

 
LDAP DEBUG PARAMETERS

LDAPDebug=7
Increases whatever is reported by the LDAP task to assist in lookups, but will also have a potential performance impact on the LDAP server depending on usage.

 
ADMINP DEBUG PARAMETERS

Debug_ADMINP=1
This debug parameter provides for the administration process to save its schedule information each time the schedule is updated.

 
CONNECTIVITY DEBUG

Debug_TCP_All=1
This provides low-level TCP/IP session information and must be used rarely because of the amount of logging and possible impact to Domino server performance.

Debug_TCP_Errors=1

This is similar to the Debug_TCP_All=1 parameter, in that, it provides low-level information about TCP-related errors that are encountered.

Log_Connections=1

When this debug parameter is set, the Domino server console displays the Notes network port, the network address of the requesting system, and the network address of the destination server.

Log_Sessions=1

Enabling this parameter posts each individual session to the Domino server console, and includes the user and the version of the Notes client being used.Chapter 8. Problem determination  353

Debug_TCP_Session=1

This enables debug information about when sessions are opened and closed to the Domino server console.

 
FULL TEXT INDEX DEBUG

Debug_FTV_Search=1
This displays information about full-text searches and statistics.

Debug_FT_Stream=1

This records every document that is full-text indexed by the Domino server.

Debug_FTV_Index=1

This displays debug information about the indexer when updating full-text indexes.

 
REPLICATION DEBUG PARAMETERS

Log_Replication=4
This debug parameter specifies whether the start and the end of replication sessions are posted to the Domino server console. If using the value of 4, it reports replication all the way down to field-level replication. If set to 3, it records down to the note level, and if set to 2, it reports activity at the database level.

Debug_REPL_Time=1

This parameter posts to the Domino server console the time a replication action took.

Debug_REPL_All=2

This parameter provides additional information about each document that is not replicating.

 
HTTP DEBUG PARAMETERS

HTTPAgentDebug=4
This is used to help debug Java agents within HTTP.

AgentThreadDebug=1

This assists in determining which HTTP agent is being processed at the time of a server failure.

HTTPEnableThreadDebug=1

This generates htthr files detailing all the HTTP thread activity.

HTTPLogFormatAscii=1

This allows the HTTP log files to be written in ASCII instead of Extended Binary Coded Decimal Interchange Code (EBCDIC).

DebugShowJavaAgentTID=1

This allows for determining which worker or control thread spawns which Java thread when executing a Java agent. It also prints out the agent name.

 
TRANSACTION LOGGING DEBUG PARAMETERS

Debug_RM_Debug=1
This debug parameter reports high-level information about the actions that the recovery manager is taking against each database.354  Implementing IBM Lotus Domino 7 for i5/OS

 
MEMORY OVERWRITE DEBUG PARAMETERS

Debug_Checkmarkers=1
This debug parameter is used to help diagnose memory overwrites.

 
COMPACT DEBUG PARAMETERS

Debug_DBCompact=1
This debug parameter provides additional high-level details about the compact task activity.

 
REPORTS DEBUG PARAMETERS

Debug_Reports=1
This allows for additional logging of reports that are run from reports.nsf.

 
MEMORY RELATED DEBUG PARAMETERS

Debug_Showleaks=2
This enables memory usage tracking in conjunction with memory dump to help determine if a leak exists.

Debug_TrapLeaks_ShowStack=1

This assists in debugging potential memory leaks.

NSD_RUN_MemCheck=1

This provides for memory-related debug, and is described in 8.4.1, “MEMCHECK”.

Quelle: http://www.d-pit.com/index.php/technotes-a-faqs-topmenu-39/28-ibm/lotus-domino-admin-faqs/3437-lotus-domino-debug-settings

Lutz Geschinsky | 16. Oktober 2019 12:40:50 | Kommentare (0) | Permanent Link

Archiv

Oktober 2019 (5)
September 2019 (5)
Mai 2019 (4)
April 2019 (4)
März 2019 (1)
Februar 2019 (5)
Januar 2019 (3)
Dezember 2018 (6)
November 2018 (3)
Oktober 2018 (8)
September 2018 (4)
August 2018 (4)
Juli 2018 (5)
Juni 2018 (4)
Mai 2018 (3)
April 2018 (2)
März 2018 (3)
Februar 2018 (9)
Januar 2018 (7)
Dezember 2017 (4)
November 2017 (3)
Oktober 2017 (5)
September 2017 (8)
August 2017 (10)
Juli 2017 (4)
Juni 2017 (6)
Mai 2017 (12)
April 2017 (6)
März 2017 (13)
Februar 2017 (6)
Januar 2017 (13)
Dezember 2016 (11)
November 2016 (9)
Oktober 2016 (7)
September 2016 (9)
August 2016 (7)
Juli 2016 (8)
Juni 2016 (3)
Mai 2016 (6)
April 2016 (7)
März 2016 (7)
Februar 2016 (9)
Januar 2016 (9)
Dezember 2015 (8)
November 2015 (9)
Oktober 2015 (13)
September 2015 (10)
August 2015 (8)
Juli 2015 (6)
Juni 2015 (12)
Mai 2015 (14)
April 2015 (10)
März 2015 (10)
Februar 2015 (12)
Januar 2015 (14)
Dezember 2014 (14)
November 2014 (15)
Oktober 2014 (10)
September 2014 (8)
August 2014 (9)
Juli 2014 (21)
Juni 2014 (9)
Mai 2014 (13)
April 2014 (9)
März 2014 (10)
Februar 2014 (12)
Januar 2014 (3)
Dezember 2013 (5)
November 2013 (3)
Oktober 2013 (6)
September 2013 (6)
August 2013 (1)
Juli 2013 (9)
Juni 2013 (2)
Mai 2013 (2)
April 2013 (12)
März 2013 (11)
Februar 2013 (7)
Januar 2013 (10)
Dezember 2012 (11)
November 2012 (9)
Oktober 2012 (5)
September 2012 (11)
August 2012 (9)
Juli 2012 (5)
Juni 2012 (3)
Mai 2012 (12)
April 2012 (3)
März 2012 (8)
Februar 2012 (5)
Januar 2012 (13)
Dezember 2011 (5)
November 2011 (12)
Oktober 2011 (6)
September 2011 (11)
August 2011 (6)
Juli 2011 (10)
Juni 2011 (8)
Mai 2011 (7)
April 2011 (8)
März 2011 (12)
Februar 2011 (7)
Januar 2011 (2)
Dezember 2010 (9)
November 2010 (4)
Oktober 2010 (9)
September 2010 (5)
August 2010 (6)
Juli 2010 (5)
Juni 2010 (6)
Mai 2010 (2)
April 2010 (4)
März 2010 (7)
Februar 2010 (5)
Januar 2010 (6)
Dezember 2009 (1)
November 2009 (7)
Oktober 2009 (2)
August 2009 (1)
Juni 2009 (4)
Mai 2009 (3)
April 2009 (1)
März 2009 (1)
Februar 2009 (1)
Januar 2009 (5)
Dezember 2008 (2)
November 2008 (4)
Oktober 2008 (9)
September 2008 (2)
Juni 2008 (2)
Mai 2008 (6)
April 2008 (4)
März 2008 (6)
Januar 2008 (7)
November 2007 (3)
Oktober 2007 (2)
September 2007 (2)
Juni 2007 (2)
Mai 2007 (1)
April 2007 (5)
Februar 2007 (4)
Januar 2007 (2)
Dezember 2006 (2)
November 2006 (5)